Home
/
Chrysler
/
200 2016
/
Owner'S Manual

Chrysler 200 2016, Owner'S Manual, Page: 137 / 706

Share

Page: 137 / 706

Chrysler 200 2016 Owner'S Manual Download Page 137

The BSM detection zone covers approximately one lane
width on both sides of the vehicle (12 ft or 3.8 m). The
zone length starts at the outside rear view mirror and
extends approximately 10 ft (3 m) beyond the rear
bumper of the vehicle. The BSM system monitors the
detection zones on both sides of the vehicle when the
vehicle speed reaches approximately 6 mph (10 km/h) or
higher and will alert the driver of vehicles in these areas.

NOTE:

The BSM system does NOT alert the driver about

rapidly approaching vehicles that are outside the detec-
tion zones.

The area on the rear fascia where the radar sensors are
located must remain free of snow, ice, and dirt/road
contamination so that the BSM system can function
properly. Do not block the area of the rear fascia where
the radar sensors are located with foreign objects (bum-
per stickers, bicycle racks, etc.).

The BSM system notifies the driver of objects in the
detection zones by illuminating the BSM warning light
located in the outside mirrors in addition to sounding an
audible (chime) alert and reducing the radio volume.
Refer to “Modes Of Operation” for further information.

The BSM system monitors the detection zone from three
different entry points (side, rear, front) while driving to
see if an alert is necessary. The BSM system will issue an
alert during these types of zone entries.

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

135

«
...
135
136
137
138
139
...
»

Summary of Contents for 200 2016



































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments