7
6. Slide the 5” heat shrink tubing over the woven braid piece, allowing 1/2” to extend past the end of each end of
the woven sleeving.
7. Apply heat evenly to the heat shrink tube until it shrinks around the cable.
• 5” heat shrink tube.
• Allow 1/2” to extend past both ends of woven sleeving.
8. While the shrink tubing is still hot, gently squeeze the end of the shrink tube with pliers and hold until cool. The
end must remain visibly sealed when the pliers are removed. If the tube does not remain sealed, then repeat
steps 7 and 8.
Gently squeeze end while tube is
still hot. Hold until cool.
