Electrical Safety Analyzer 19032-P Quick Start Guide
16
are different functions. The right side of display has
corresponding function description. If the description
is blank, it means corresponding function is invalid.
(5) MENU Key:
Under each main display mode, press this key to return to
“MAIN MENU” mode.
(6) LOCAL Key:
When the main unit under Remote status, return the
control right to main unit by pressing this key.
(7) Cursor Keys:
The
[
U
] and [
V
] keys are for moving highlighted cursors.
(8) Data Entry Keys/Program Keys
[[0][.]
∼
[9]:
Numeral/character key, for inputting each test
parameter data (numeral or alphabet). Under “MAIN
MENU” display mode, [1], [2], [3], [4], [5] keys can
enter various display modes.
[ENTER]:
Confirmation key. After inputting test parameter, press
this confirmation key. Then the value of inputting will be
confirmed.
[CLR]:
Clear key. When input test parameter, if there is any error
can press this key to cancel error data and then input again.
(9) Indicator:
With UNDER TEST to indicate LED and judge/display LED.
(10) HV2:
This terminal includes two states. (1) High voltage output
terminal (when GFI setting is FLOAT) (2) Reference terminal
of high voltage output terminal (HV1) is low potential terminal
(when GFI setting is ON or OFF).
(11) HV1:
High electric potential terminal of high voltage output.
This terminal belongs to high electric potential output, usually is
high voltage output. Therefore, this terminal is very dangerous.
Don’t touch it when DANGER LED is light, there is high voltage
outputting.
(12) DRIVE (-):
Ground Bond current test terminal
(13) SENSE (-):
The grounding impedance test negative, Sense negative
terminal.
(14) SENSE (+):
The grounding impedance testing positive terminal, Sense
positive terminal.
(15) DRIVE (+):
High electric potential terminal of mass current output.
When the terminal is grounding resistances test, the high
electric potential terminal of mass current output.
