Christie Spyder X20, User Manual

Page: 66 / 172

Hot-Sync
Spyder X20 User Manual 66
020-000916-01 Rev. 1 (04-2016)
Figure 32: User Diagnostics Viewer
When excluding router definitions from the HotSync, it is important to ensure
the router ID within all Spyder frame(s) match to ensure all source definitions
using the router(s) will function correctly on the backup system(s).
The router ID can be found at the top of the router properties panel within
Vista Advanced.
Apply Output Configurations
Output configurations can be pushed to a backup Spyder frame as part of the HotSync operation. This is useful
when performing an initial HotSync between multiple Spyder systems, or when output configurations are
changed on the primary system and need to be replicated to a backup system. Applying output configurations
will cause outputs to flicker, making it an undesirable operation when performing several HotSync operations.
Provided the output configurations have not changed on the primary system, it is typically not necessary to
update the output configurations on the backup system(s) after initial configuration.