Christie Spyder X20, User Manual

Page: 32 / 172

Getting Started
Spyder X20 User Manual 32
020-000916-01 Rev. 1 (04-2016)
Figure 17: Areas of new source configuration
3. Select the router that the source is connected to from the drop down list. If the connected router is not
yet defined, you can click the
Add link above the router combo box and enter the Router type and size,
the connector type (on the router). While in the router configuration panel you can optionally adjust the
patch configuration with the
Spyder system (the patch of a router is the way each router outputs are
connected to the Spyder inputs).
Note : Remember, the arrows at the top of the Properties section can be used to go back to previous menus – or
forward.
4. Select whether the input configuration is: New, Link, Copy . New creates a completely new configuration,
Copy creates a configuration from an existing configuration, and Link associates the new source to an
existing input configuration.
5. Once the first panel is complete, click Configure Source under Add new Source (top right corner of panel
– see previous screenshot above<<provide figure number>>).
6. Fill in the input configuration information (part will already be auto filled). [Use the Autosync button to
automatically detect the type and properties of the video source.]
Figure 15: Source List
Figure 16: Source
Properties