Christie MIRAGE DS+10K-M, Setup Manual

Page: 57 / 72

Section 6: Specifications
Mirage M Series Setup Guide 6-3
020-100592-02 Rev. 1 (11-2010)
6.1.10 Convergence
Convergence zones A, B, C are as defined in Figure 2. Zone A has a diameter ¼ of the image height. Zone B has a diameter
of full image height. All specified convergence errors are between any two colors after a minimum warm-up of 30 minutes.
Convergence is specified with a 1.4-1.8 HD lens (part number 118-100112-01) in the 1.4:1 position with zero offset. Bore-
sight alignment must be adjusted for zero angular error. (
Note : convergence error includes the effects of lateral color in the
projection lens. Measurements must be done on horizontal and vertical test pattern lines that intersect the center of the
image).
6.1.11 Blemishes
Blemishes are to be observed at 1 full screen height distance from the image for a period of 30 seconds. Screen size: 10 foot
wide for 350W models, 8 foot wide for 200W models. Blemishes are defined as per TI Specification 2506811.
6.1.12 Pixel Defects
6.1.13 Image Artifacts
Measurement
Area
Maximum Convergence
Error (Pixels)
Zone A 1/4
Zone B 1/2
Zone C 3/4
Red screen No blemishes
Green screen No blemishes
Blue screen No blemishes
White screen No blemishes
Black screen No blemishes
Red 0 bright, 1 dark
Green 0 bright, 0 dark
Blue 0 bright, 2 dark non-adjacent
Evaluate on multi-burst or fine grid test pattern No visible artifacts with observer at 1 full screen
height from image
(Figure applicable to both HD (1920x1080p) and SXGA+)