Christie M35GPS-AT, Operating Instructions Manual

Page: 27 / 94

5 : M a i n t e n a n c e
CHRISTIE INCORPORATED
P35GPS Projector 5-3
June, 1998
4. For projectors equipped with automatic turret, slide aperture carrier dovetail out of
plunger connector.
5 . 4 . 2 . O
U T E R
T
I M I N G
B
E L T
Refer to Figure 5-2 below.
1. Loosen outer belt tension adjust assembly screw (item 6 in Figure 5-2 ) and slide idler
(item 3 in Figure 5-2 ) up to release tension on outer timing belt (item 5 in Figure 5-2).
2. Remove outer timing belt.
1: Jackshaft Pulley
2: Motor Pulley
3: Idler
4: Flanged Idler
5: Outer Timing Belt
6: SHC Screw
7: Inner and Outer Idler
Assembly
8: Intermittent Pulley
9: Screw
Figure 5-2: Outer Timing Belt
5 . 4 . 3 . I
N N E R
T
I M I N G
B
E L T
Refer to Figure 5-3 below.
1. Remove outer timing belt (see Section 5.4.2 ).
2. Loosen adjustable inner idler pulley screw (item 1 in Figure 5-3 ).
3. Remove inner timing belt (item 10 in Figure 5-3 ).