2
CHRISTIE INCORPORATED
P35GPS Projector
2-1
June, 1998
2 . G E N E R A L
D E S C R I P T I O N
The
CHRISTIE
P35GPS Projector, manufactured exclusively by
CHRISTIE
INCORPORATED
in Cypress, California, is a dual-lens 35mm movie projector that
employs a revolutionary sealed-bearing intermittent movement called the Ultramittent
©
.
This movement, coupled with uncompromising design and assembly workmanship, results in
the finest possible theater picture reproduction. The Ultramittent movement is standard on
all
CHRISTIE
projectors.
2.1. O
P T I O N AL
F
E AT U R E S
Options available for enhancing the standard features of the P35GPS projector include:
•
manual dual-lens turret
•
automatic dual or triple lens turret, including automatic aperture changer
•
inboard Dolby digital reader
•
all models available in 50 Hz or 60 Hz
2.2. S
P E C I F I C AT I O N S
Standard specifications for the P35GPS projector family are listed in the Table shown in
POWER REQUIREMENTS:
Input Voltage
115 VAC, 5 Amp, 60 Hz
OR
220 VAC, 3 Amp, 50 Hz
DIMENSIONS:
Height
23 inches
Width
18 inches
Depth
16 inches
WEIGHT
:
Standard: approximately 90 lb.
FILM SPEED:
Standard: 24 frames/sec (90 ft/min)
OPERATING TEMPERATURE:
0 to +45°C
MOTOR:
Synchronous split phase, 1800 rpm, 60 Hz
OR
1500 rpm, 50 Hz
Figure 2-1: Table of Equipment Specifications
These specifications may vary slightly, depending upon the particular model and options
chosen.
