Christie LW651i Setup Manual Download Page 17

Page: 17 / 26

LWU701i/LW751i/LX801i/LWU601i/LW651i

Setup Guide

020-000792-02

LIT GUID SET D2

ENGLISH

Replacing the lamp

A lamp has a finite product life. Using the lamp for long periods of time could

cause the pictures to darken or the color tone to turn poor. Note that each lamp
has a different lifetime, and some may burst or burn out soon after you start using
them.

Preparation of a new lamp and early replacement are recommended. To prepare

a new lamp, contact your dealer and indicate the lamp type number.

Type number : 003-005336-01 (DT01885) <LWU701i/LW751i/LX801i>

003-005337-01 (DT01875) <LWU601i/LW651i>

Turn the projector off, and unplug the power cord.

Allow the projector to cool for at least 45 minutes.

Prepare a new lamp. If the projector is mounted

with specified mounting accessories, or if the lamp

has broken, also ask the dealer to replace the lamp.

If replacing the lamp by yourself, complete the following

procedure.

Loosen the screw (marked by arrow) of the lamp cover

and then slide down and lift the lamp cover to remove it.

Loosen the three screws (marked by arrow) of the

lamp, and slowly pull the lamp out by the handles.

Never loosen any other screws.

Insert the new lamp, and firmly retighten the

three screws of the lamp loosened in the

previous process to lock it in place.

While putting the interlocking parts of the lamp

cover and the projector together, slide the lamp

cover back in place. Firmly fasten the screw of

the lamp cover

Turn the projector on and reset the lamp time
using the LAMP HOURS item in the SETUP menu.

(1) Press the

MENU

button to display a menu.

(2) Point at the ADVANCED MENU in the menu using the ▼/▲

button, then press the ► button.

(3) Point at the

SETUP in the left column of the menu using

the ▼/▲button, then press the ► button.

(4) Point at the LAMP HOURS using the ▼/▲ button, then

press the ► button. A dialog appears.

(5)

Press the

►

button to select “

” on the dialog. The lamp time is reset.

NOTE

• Reset the lamp time only when you have replaced the lamp, for a

suitable indication about the lamp.

CAUTION

►Do not touch the interior of the projector, while the lamp is

taken out.

4, 5

Handles

Lamp cover

http://www.pureglare.com.au

Summary of Contents for LW651i



























Search results

Summary of Contents for LW651i

Reviews:

Related manuals for LW651i

Brands by name

Popular brands

Christie LW651i, Setup Manual

Search results

Summary of Contents for LW651i

Reviews:

Related manuals for LW651i

Brands by name

Popular brands