16
020-000792-02
LIT GUID SET D2
LWU701i/LW751i/LX801i/LWU601i/LW651i
Setup Guide
NOTE
• Power off the projector after any connected devices are powered
off.
• This projector has the AUTO POWER OFF function that can make the
projector turn off automatically. For more information, see
User’s Manual -
Operating Guide
.
Turning off the power
1.
Press the
STANDBY/ON
button on the
projector or the
STANDBY
button on
the remote control.
The message “Power off?” appears
on the screen for about five seconds.
2.
Press the
STANDBY/ON
or
STANDBY
button again while the message
appears.
The projector lamp goes off, and the
POWER
indicator begins blinking in
orange. Then the
POWER
indicator
stops blinking and light in steady orange
when the lamp cooling is complete.
3.
Attach the lens cover, after the
POWER
indicator turns to steady orange.
Do not turn the projector on for 10 minutes or more after turning it off.
Do not turn the projector off shortly after turning it on. These operations might
cause the lamp to malfunction or shorten the lifetime of some parts including the
lamp.
WARNING
►Do not touch the lamp cover and the exhaust vents during
use or just after use, as they are too hot.
►Remove the power cord for complete separation. The power outlet should
be close to the projector and easily accessible.
POWER
indicator
STANDBY
button
STANDBY/ON
button
http://www.pureglare.com.au
