14
RPMX-100U Installation Manual
6. Select
Auto Setup from the main menu, to give the projector a chance to setup
the best possible settings for the chosen incoming signal.
7. Verify options in the menu Video Options are correct for the chosen signal.
8. Change
Resize Presets if you want the image displayed at any other resolution
other than native.
9. Adjust
Pixel Phase and Pixel Tracking to eliminate any noise in the displayed
image – accessible from the Size and Position menu.
10. Adjust H-Position and V-Position (in Size and Position menu) to re-center the
image on screen.
11. Adjust Size (in Size and Position menu) first until the image is at the desired
width, then adjust Vertical Stretch. Adjusting one option may have an effect on
the other, repeat adjustment if necessary.
12. If required, readjust H-Position and V-Position to center the image.
13. Adjust black levels and input levels in the Input Levels menu. For quick setup,
select Auto Input Levels.
14. Ensure all projectors are operating at the same power level. (Switch located on
the PHM can be set at 100W or 120W).
15. Adjust color primaries. Refer to the detailed, step-by-step instruction in the
User’s Manual – Matching Colors of Multiple Projectors.
