Installing a display
panel
Learn how to install and configure the display panel and the remote control.
Christie recommends that the ambient temperature around a display panel or a video wall remain
constant and below 40 degrees Celsius (104 degrees Fahrenheit). Ensure the display panel or video
wall is kept away from heating and air conditioning vents.
If you are mounting a display panel in an enclosure, ensure sufficient space is left on all sides between
it and surrounding objects. Doing so allows heat to disperse, and helps to maintain the proper
operating temperature. If you are mounting a display panel close to a wall, or are using an OPS
module, active cooling may be required to remove heat and maintain an ideal ambient temperature.
For thin installations or to mount the display close to a wall, remove the handles after hanging the
display on the extending wall mount by turning the handles counter-clockwise.
Inserting batteries in the remote control
Learn how to install batteries in the remote control.
Before you insert batteries in the remote control, consider the following:
•
Ensure that the battery polarities are correct.
•
Do not mix an old battery with a new one or mix different types of batteries together.
•
Do not expose batteries to excessive heat such as sunlight or fire.
If you will not use the remote control for a long time, consider removing the batteries to avoid
damage from battery leakage.
1. On the back of the remote control, press down on the tab on the cover and pull the cover up.
2. Insert the batteries. Ensure that the polarities correctly match the + and - markings inside the
battery compartment.
3. Insert the lower tab of the cover into the opening, and press down on the cover until it clicks in
place.
Operating the remote control
Consider the following when using the remote control.
•
Verify that nothing is obstructing the infrared beam between the remote control and the IR
receiver on the display panel.
•
If the effective range of the remote control decreases, or it stops working entirely, replace the
existing batteries with new ones.
•
If necessary, use an IR extender to move the IR receiver to a more convenient place. For more
information, see Creating an IR extender connection (on page 16).
FHD553-XE and FHD553-XE-H LCD Panels User Guide
13
020-001183-03 Rev. 1 (04-2018)
Copyright
©
2018 Christie Digital Systems USA, Inc. All rights reserved.
