Christie Entero RPMHD-LED01, Service Manual, Page: 59 / 70

Entero RPMSP/RPMWU/RPMHD-LED01 Service Manual 7-1
020-100368-05 Rev. 1 (06-2012)
7 Service Menu
The service menu is accessible only by password:
•
Main Menu > Configuration
The service menu items give the service technician more control
over individual projector settings than is available to the user.
7.1 Color Primary Settings
• Service Menu > Color Primary Settings
This menu contains information about the native LED colors that the
projector needs in order to match colors when
Bright/ColorLOC is
turned OFF (see 7.10 ArrayLOC Service ).
NOTE:
These values are factory-set and should NOT be changed
unless the projector is not operating correctly with ArrayLOC
turned
OFF .
To update values:
1. Bright/ColorLOC must be turned OFF by selecting:
• ArrayLOC Configuration > Bright/ColorLOC Mode =
Off
2. Color adjustment must be disabled by selecting:
• Color Saturation > Select Color Adjustment = Max
Drives
3. LED brightness should be set to native or the preferred
projector by selecting:
•
Advanced Color Adjustment > Color Mode = Native
4. Go to: Service Menu > Color Primary Settings
a. When the red menu items are selected a red test pattern
should appear. If not, select Auto Color Enable . Measure
its color and update the values.
b. Repeat the measurement for the green, blue and white
colors.
5. Color adjustment can be re-enabled by selecting:
• Main Menu > Configuration > Service > Color Saturation > Select Color Adjustment and choosing
any other option other than Max Drives .
Figure 7-1 Color Primary Settings