Christie Entero RPMHD-LED01 Service Manual Download | Manualshive

Page: 54 / 70

background image

5-2

Entero RPMSP/RPMWU/RPMHD-LED01 Service Manual

020-100368-05 Rev. 1 (06-2012)

Section 5: Specifications

Reliability and
serviceability

MTBF

• > 50,000 hrs MTBF for all major modules

MTTR

• < 15 minutes with modular design
• > 5 minutes for lamp

Regulatory approvals

• Directives: (EC) 2002/95/EC (RoHS)
• Regulation (EC) No. 1907/2006 (REACH)
• CAN/CSA C22.2 No. 60950-1
• UL 60950-1
• IEC 60950-1
• FCC, Part 15, Subpart B, Class A
• EN55024/CISPR24
• Certifications marks (check with Christie for latest update)

• cULus (Canada & US)
• CE (EU)
• CCC (China)
• GoST-R (Russia)
• KC (Korea)
• PSE (Japan)
• C-Tick (Australia & New Zealand)

Calibration

• All projection units are factory calibrated for best color performance

Limited warranty

• 2 years parts and labor
• Contact an authorized Christie representative for full details of our limited warranty

Additional features and benefits

• Integrated 6-axis adjustment system for precise geometry alignment
• Full-function remote keypad with easy-to-use menu system
• Multiple set-up memories to manage multiple input sources
• Extensive scaling capability
• Window/screen processing — external inputs can be displayed across an array of screens up to 3 x 3 without an external

processor (a single input must be distributed to all cubes or it can be daisy-chained through the cube’s optional Twin HDMI
module)

• 3x redundant cooling fans
• Innovative water-filled, sealed heat pipe cooling system (maintenance free, no motorized pumps, hazardous chemicals or

concern of leakage)

1

LED lifetime is based on expected useful life (50% of original brightness).

2

Brightness specifications are at reduced color space settings.

3

The contrast ratio specified is the “natural” contrast ratio measured

by both full field and ANSI methods. Such values are critical for proper contrast performance assessment – especially for video walls.

4

For best long-term performance and reliability, Christie recommends

that all electronic equipment, such as projection systems, are regularly operated at temperatures below 77° F (25° C).

RPMSP-LED01 RPMWU-LED01 RPMHD-LED01

«
...
52
53
54
55
56
...
»

Summary of Contents for Entero RPMHD-LED01







































































Reviews:

No comments

Related manuals for Entero RPMHD-LED01

Brand: Barco Pages: 35

Brand: Panasonic Pages: 78

Brand: LSI Pages: 4

Brand: CyberPower Pages: 2

Brand: Dukane Pages: 2

Brand: Emos Pages: 4

TITAN WUXGA 3D-L • TITAN WUXGA 3D-P

Brand: Digital Projection Pages: 2

Brand: InFocus Pages: 58

RLD (3.0-4.5:1)

Brand: Barco Pages: 9

Brand: Optoma Pages: 60

TheaterCurved Reference X-Mask T-X4R

Brand: Screen Research Pages: 74

Brand: Epson Pages: 251

EMP-715 - XGA LCD Projector

Brand: Epson Pages: 12

Brand: Epson Pages: 3

Brand: Epson Pages: 2

Brand: Epson Pages: 20

Brand: Epson Pages: 28

Brand: Epson Pages: 5

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands