Section 3: Operation
3-56
Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual
020-100001-04 Rev. 1 (12/07)
- Software v1.6g or higher
Numbers Select Main Image
Use
Numbers Select Main
Image
to use the numeric
keys #1-8 as input keys. This remapping of the keypad
(see right) can be particularly useful with PIP displays,
providing a convenient shortcut for changing the
primary (background) image without first having to
return to the
Main
menu. Select “Always” to use the
keys in this manner all of the time, even with single
displays. For normal keypad function, select
Never
(default). Set to
When PIP Active
to activate number
keys only when PIP is in use.
NOTE:
Numbers Select Main Image
keypad
functionality works only when menus are closed.
Whenever you install a new lamp in the
projector, access the
Lamp
menu to record
the lamp serial number in the projector’s
memory. You can also choose a lamp mode
for regulating power and light output,
change optical aperture size, and access
other read-only information pertaining to
past and present lamps.
LAMP HOURS
(
read-only)
shows the number
of hours logged on the current lamp.
Whenever you record a new lamp serial
number this value automatically resets to “0”, where it begins to log time for the new
lamp. This information also appears in the
Status
menu.
LAMP S/N
(read-only)
is the serial number recorded for the current lamp. When you
install a new lamp and enter its serial number, the number will appear here.
Enter a checkmark for
LAMP MESSAGE
to enable a warning message that will appear
upon power-up when the lamp has reached the specified lamp limit and should be
replaced. Delete the checkmark to prevent display of this message—instead, when
your lamp expires, only the status display messages on the back of the projector will
provide the visual warning to replace the lamp.
NOTES:
1)
It is recommended that the Lamp Message checkbox remain enabled.
2)
When a lamp warning message appears, press
Exit
to temporarily cancel the
message. The message will continue to appear upon power-up until you install a new
lamp.
Set
LAMP LIMIT
to the number of hours you expect to log on the current lamp before
replacing it. This will trigger a lamp message on-screen (if enabled).
NOTES:
1)
If you change modes over the life of a lamp, the lamp limit you originally
expected may no longer be possible.
2)
Turning the lamp on and off reduces lamp life
3.8 Working
with
the Lamp
1.
2.
3.
4.
5.
6.
7.
8.
Lamp Hours
Lamp S/N
Lamp Message
Lamp Limit
Lamp Mode
Power
Intensity
Optical Aperture
Lamp History
Change Lamp
Lamp
0
?
1000
Power
500
0
3
