Christie DW4Kc User Manual Download | Manualshive

Page: 107 / 178

background image

Section 4: Maintenance

Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User’s Manual

4-3

020-100001-04 Rev. 1 (12/07)

- Software v1.6g or higher

•

Do not set or rest items on the power cord. Place the projector in an area where
the projector cord cannot be abused or damaged by persons walking on it or by
objects rolling over it.

•

Operate the projector at the specified voltage only. Do not overload power outlets
and extension cords as this can result in fire or shock hazards.

•

The projector is equipped with a three-wire plug having a third grounding pin.
This is a safety feature – if you are unable to insert the plug into an outlet contact
an electrician to have the outlet replaced. Do not defeat the safety purpose of this
grounding-type plug.

Slots and vents in the projector provide ventilation. Never block or cover these
openings. This ensures reliable operation of the projector and prevents overheating.

•

Do not place the projector over a radiator or heat register. The projector should
not be placed in an enclosure unless proper ventilation is provided.

•

Do not insert objects into the ventilation openings of the projector. They may
touch dangerous voltages or short-out components resulting in a fire or shock
hazard. Do not spill liquids of any kind into the projector. Should an accidental
spill occur, immediately unplug the projector and have it serviced by a qualified
service technician.

If any of the following conditions exist, immediately unplug the projector from the
power outlet and ask a qualified service technician to look at it.

•

The power cord has been damaged.

•

The internal cooling fans do not turn on within two minutes when the projector is
first powered up.

•

Liquid has been spilled into the projector.

•

The projector has been exposed to excessive moisture.

•

The projector is not operating normally or its performance has significantly
deteriorated in a short period of time.

•

The projector has been dropped or the shipping case (if applicable) has been badly
damaged.

WARNING

Do not attempt to service the projector yourself. All

servicing must be performed by Christie accredited

service technicians.

Use replacement parts that are manufacturer-approved

only. Use of any other part other than the ones specified

by the manufacturer can result in fire, electric shock or

risk of personal injury and irreparable equipment

damage.

Ventilation

f

Servicing

f

«
...
105
106
107
108
109
...
»

Summary of Contents for DW4Kc



















































































































































































Reviews:

No comments

Related manuals for DW4Kc

Brand: Wayne Pages: 16

Aqua-Pure AP510

Brand: 3M Pages: 16

Brand: Teac Pages: 3

Brand: L-Acoustics Pages: 98

Brand: DUB Edition Pages: 9

Brand: NEC Pages: 16

ProMedia Ultra 2.0

Brand: Klipsch Pages: 7

Brand: Medion Pages: 308

Brand: Electro-Voice Pages: 8

Brand: Vizio Pages: 20

AMX ACENDO VIBE ACV-2100

Brand: Harman Pages: 41

Brand: Vivax Pages: 68

Brand: Gemini Pages: 7

Brand: EAW Pages: 2

Brand: lidl Pages: 11

Brand: EDISON Professional Pages: 2

Brand: Ricatech Pages: 64

GAI-Tronics 12538 Series

Brand: Hubbell Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands