Christie CS50-D100U, User Manual

Page: 37 / 116

OPERATION
3-20
RPMS, CS50 & CS70-D100U/UF User’s Manual
such as video connected to
INPUT 3
or
INPUT 4
, produce distorted images that are too
tall or too wide. See below.
SELECT FULL SIZE
to use all pixels for displaying the
image, regardless of source or original aspect ratio. See
right. NOTE: SXGA resolution shown.
SELECT FULL WIDTH
to fill the screen from left-to-right
for displaying the image. The top and bottom of the
image may appear black (similar to a 16:9 image).
SELECT FULL HEIGHT
to fill the screen from top-to-
bottom for displaying the image. The left and right
areas of the image may appear black.
SELECT ANAMORPHIC
to display an entire non-
HDTV “wide screen” (anamorphic) image in its
native 16:9 aspect ratio. Known as letterbox, the
image will fill the screen from left-to-right, but will not
use all vertical pixels available (top and bottom will be
black). If you do not choose Anamorphic when a non-
HDTV anamorphic image is present, the default image
will be stretched vertically, characterized by obvious
distortion and “thin people”.
NOTE: Use Anamorphic for regaining a 16:9 display of non-HDTV anamorphic
sources only (typically found on some DVDs, for example). For HDTV, the Default
setting will produce the same result.