#
Status
State Value
Description
Warming Up
The combiner is in the process of turning
on.
Cooling Down
The combiner is in the process of cooling
down.
Overtemperature
The combiner has turned off due to the
thermal fuse being tripped.
Overcurrent Detected
The combiner has turned off due to over
current protection.
Initialization Fault
The combiner has turned off
unexpectedly during while the projector
is warming up/initializing..
Runtime Fault
The combiner has turned off
unexpectedly while in the projector is
on.
1
Combiner Hours
<hours>:<minutes> (h:m)
Displays the total amount of time that
the combiner has been on.
Unknown
The combiner hours are unknown
because the combiner cannot be
communicated with.
228
229
230
231
232
237
242
247
Diode current (Red1)
Diode current (Red2)
Diode current (Red3)
Diode current (Red4)
Diode current (Green
+Red A)
Diode current (Green
+Red B)
Diode current (Green
+Red C)
Diode Current (Blue)
<current>mA
Displays the current being drawn by the
diode(s).
Unknown
Cannot retrieve the value due to a
communication error with the combiner
firmware.
Off
The diode(s) is currently off.
251 Combiner TEC Current
<current>mA
Displays the current being drawn by the
thermal electric cooler (TEC).
Unknown
Cannot retrieve the value due to a
communication error with the combiner
firmware.
Off
The thermal electric cooler (TEC) is not
running.
Detection Fault
Cannot detect a current. It appears the
TEC connector is unplugged.
252 Combiner Phosphor
Wheel
<RPM>RPM
Displays the phosphor wheel RPM.
Crimson status system
Crimson and Crimson Mirage Technical Reference–Status System
14
020-102661-04 Rev. 1 (07-2020)
Copyright
©
2020 Christie Digital Systems USA, Inc. All rights reserved.
