#
Status
State Value
Description
The upgrade should not take longer than
one minute and occurs immediately
following a main system software
upgrade.
Detection Fault
Cannot detect the combiner.
Upgrade Failure
Cannot upgrade the combiner firmware.
The projector will not turn on.
Signal Group (SST+SIGN?)
The Signal Group provides values and fault conditions relating to the video signal status for Crimson.
#
Status
State Value
Description
0
11
12
13
14
21
22
23
24
HDBaseT Input
Card 1 - Input 1
Card 1 - Input 2
Card 1 - Input 3
Card 1 - Input 4
Card 2 - Input 1
Card 2 - Input 2
Card 2 - Input 3
Card 2 - Input 4
Not Present
Either the card is not present or the card
does not have a single input port.
<input type> (No Signal)
No signal is detected.
Where <input type> : {DP, HDMI, DVI,
3G-SDI}
<input type>, <active
window>@ <v-sync rate>
(<status>)
Where
<input type> : {DP, HDMI, DVI, 3G-
SDI}
<active window> :
<columns>x<rows>
<v-sync rate> : the input frame rate,
in Hz (##.##Hz)
<status> : {“Master”, “No signal”,
“Inactive”, “Locked”}
<input type> <active window>
@ <v-sync rate> (<status>)
Where
<input type> : {DP, HDMI, DVI, 3G-
SDI}
<active window> :
<columns>x<rows>
<v-sync rate> : the input frame rate,
in Hz (##.##Hz)
<status> : {“Unlocked”, “Out of
phase”}
50
Output Frequency
<rate>Hz
Where <rate> : the output frame rate,
in Hertz
If the input frequency does not match
the output frequency, Free Running @
XX.YYHz is displayed.
Crimson status system
Crimson and Crimson Mirage Technical Reference–Status System
12
020-102661-04 Rev. 1 (07-2020)
Copyright
©
2020 Christie Digital Systems USA, Inc. All rights reserved.
