#
Status
State Value
Description
5
6
7
8
Lens Motor Horizontal-Axis
Lens Motor Vertical-Axis
Lens Motor Zoom- Axis
Lens Motor Focus- Axis
Calibrating
Currently calibrating the lens motor.
Calibrated
The motor range has been properly
calibrated.
Unknown
The status of the motor is unknown
because a problem occurred in the
upstream communication path.
Uncalibrated
The range for the current lens has not
been determined and/or the reported
position on the axis may be inaccurate.
Failed
During reset or calibration, an error was
detected related to the motor and/or
sensor.
9
Built-In Self Test
N/A
The built-in self test has not been
executed yet.
Passed
The built-in self test completed
successfully.
Failed
The built-in self-test failed.
10
System ID Board
OK
The device has been properly detected
and initialized.
Unknown
The status of the device is unknown.
Communication Fault
Cannot communicate with the device.
Invalid Data
The information on the device is missing
or corrupted.
11
Housekeeping Board
OK
The device has been properly detected
and initialized.
Unknown
The status of the device is unknown.
Communication Fault
The device failed to respond or provided
a bad response to a command while the
light source is on.
The projector remains on until AC power
is removed, even if this warning
condition is fixed.
Detection Fault
Cannot read the device hardware
information.
Initialization Fault
Cannot properly initialize the device.
Crimson status system
Crimson and Crimson Mirage Technical Reference–Status System
7
020-102661-04 Rev. 1 (07-2020)
Copyright
©
2020 Christie Digital Systems USA, Inc. All rights reserved.
