Section 5: Parts and Module Replacement
CP2230 Service Manual
5-41
020-100562-06 Rev. 1 (05-2016)
4. Close the lamp door.
5. Turn wall circuit ON.
6. Perform software adjustments. In the
Advanced Setup: Lamp History
window, click the
Add Lamp
button and record lamp type, serial number, reason for change and number of the hours logged on to the
lamp. If the lamp has not been previously used, enter 0. Press
Save
to enter the data. (
Figure 5-59
)
7. Power the lamp ON.
8. Click
from the TPC
Main
panel to power the lamp
ON.
9. Immediately adjust the lamp position (LampLOC
™
) via the
Advanced Setup: LampLOC
window. By adjusting lamp
position, you can achieve optimized light output by
centering the lamp with the reflector and obtaining correct
distancing from the center of the illumination system.
Figure 5-59 Add Lamp Window
