6. To focus the position I boresight guide, adjust the bottom-left boresight cap screw (D).
7. To focus the position II boresight guide, adjust the bottom-right boresight cap screw (E).
8. To focus the position III boresight guide, adjust the top boresight cap screw (F).
Turning the screws in small amounts (1/4 to 1/8 of a turn) allows you to make precise
adjustments.
Adjusting the image
CP2208-LP Installation and Setup Manual
25
020-102152-03 Rev. 1 (05-2017)
Copyright
©
2017 Christie Digital Systems USA Inc. All rights reserved.
