2. Place both hands under the corner, grasping the baseplate.
Do not lift the projector by inserting your fingers into the spaces in the skin and pulling on the
skin louvers.
3. Lift up the projector and move it to the location where it will be used.
4. If you are installing the projector in the optional rack stand (P/N: 108-416102-XX), follow the
instructions provided with the rack stand.
5. Position the projector so it is centered and parallel with the theater screen. If space is limited,
aim the projector slightly off-center and use lens offset to center the image on the screen.
Adjusting tilt and leveling the projector
To ensure optimum performance, install the projector so it is centered and parallel with the screen.
To compensate for tilt or offset, you can adjust the projector feet and the lens mount position.
The front-to-back tilt of the projector must not exceed 10°.
1. To adjust the height of the projector, loosen the lock nut on the adjustable feet on the bottom
of the projector.
A
19 mm (0.75 in.) wrench
Installing and setting up
CP2208-LP Installation and Setup Manual
14
020-102152-03 Rev. 1 (05-2017)
Copyright
©
2017 Christie Digital Systems USA Inc. All rights reserved.
