Christie BC-RAD 14XA Select, User Manual

Page: 13 / 17

11
CAUTION Keep your hand and body parts clear of the Reaction Arm and barrel when the tool is in
operation.
5.1.2 – Reaction Arm Height
Ensure the height of the socket is even with the height of the Reaction Arm as seen below in Figure 5.1.2-
1. The height of the socket cannot be shorter or higher than the height of the Reaction Arm as seen below
in Figure 5.1.2-2.
CORRECT : The Reaction Arm and socket are even height
Figure 5.1.2-1: Correct Height
INCORRECT : The leg of the Reaction Arm is too short on the left side, and too long on the right side.
Figure 5.1.2-2: Incorrect Height
IMPROPER REACTION WILL VOID WARRANTY AND CAN CAUSE PREMATURE TOOL
FAILURE.
5.1.3 – Reaction Arm Foot
Ensure the foot of the Reaction Arm aligns with the
length of the nut as seen in Figure 5.1.3-1. The length
of the foot cannot be shorter or longer than the nut as
seen in Figure 5.1.3-2.
CORRECT : The foot of the Reaction Arm aligns
with the length of the nut.
Figure 5.1.3-1: Correct Length