Serial API commands
APS Series Technical Reference
17
020-103593-01 Rev. 1 (07-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Commands
Command
Description
Value
SHP+/-
Adjusts the sharpness.
—
Examples
Add one to the sharpness data:
SHP+
Subtract one from the sharpness data:
SHP-
DPO ON/OFF
–
Direct Power On
Automatically turns on the projector when electrical power is connected.
Commands
Command
Description
Value
DPO <value>
Automatically turns on the projector when
electrical power is connected.
OFF = Disables auto power up (Default)
ON = Enables auto power up
Examples
Switch Direct power on to On:
DPO ON
Switch Direct power on to Off:
DPO OFF
STD
–
Standby Mode
Sets the projector's Standby mode.
Commands
Command
Description
Value
STD <value>
Sets
the projector’s
Standby mode.
0 = ECO
1 = Network
2 = Normal
Examples
Set the Standby mode to Normal:
Summary of Contents for APS Series
Page 1: ...APS Series Serial Commands Technical Reference 020 103593 01...
Page 36: ......
