Christie APS Series, Technical Reference

Page: 19 / 36

Serial API commands
APS Series Technical Reference 19
020-103593-01 Rev. 1 (07-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Commands
Command Description Value
LCT+LSM <value> Sets the Light source mode 0 = Full normal
1 = Normal (Default)
2 = ECO1
3 = ECO2
Examples
Set the Light source mode to Full normal:
LCT+LSM 2
LCT+LAD – Light Adjust
Sets the laser source brightness level.
Commands
Command Description Value
LCT+LAD+/- Adjusts the light source brightness level.
—
Examples
Add one to the laser source brightness level:
LCT+LAD+
Subtract one from the laser source brightness level:
LCT+LAD-
SOD+MUT-Mute
Changes the projector mute function.
Commands
Command Description Value
SOD+MUT <value> Changes the projector mute function. ON = Turns on the mute function
OFF = Turns off the mute function
Examples
Turn on mute:
SOD+MUT ON