Command
Description
Values
PIF+BCVS?
Returns the boot code.
—
PIP–Picture in Picture
Enables or disables picture-in-picture (PIP)/picture-by-picture (PBP) mode.
Commands
Command
Description
Values
PIP <value>
Enables or disables the picture-
in-picture/picture-by-picture
window.
0 = Disables the picture-in-picture/picture-by-picture
video (Default)
1 = Enables the picture-in-picture/picture-by-picture
video
Examples
Return the state of the picture-in-picture/picture-by-picture command:
(PIP?)
Disable picture-in-picture/picture-by-picture video:
(PIP 0)
Enable picture-in-picture/picture-by-picture video:
(PIP 1)
PIV–PIN Protect
Activates password protection on the projector, where a personal identification number (PIN) must be
provided before an image can be displayed.
Commands
Command
Description
Values
PIV "XXXXX"
Activates password protection on the
projector.
X = 0 to 9
Replace each X with a number from 0 to 9
Examples
Set the PIN to 33445:
(PIV "33445")
Serial API commands
GS Series 599 Serial Commands Technical Reference
48
020-102403-02 Rev. 1 (04-2017)
Copyright
©
2017 Christie Digital Systems USA Inc. All rights reserved.
