Command
Description
Values
• 00000 = Previous PIN
• NNNNN = New PIN
12345 (Default)
Examples
Replace the default PIN number with a new PIN:
(PCG "12345,78564)
PHS–Picture-in-Picture Horizontal Size
Sets the size (width) of the picture-in-picture/picture-by-picture window.
The active portion of the input signal, as determined by blanking controls, is scaled to fit into the
picture-in-picture window.
Commands
Command
Description
Values
PHS <value>
Sets the picture-in-picture/picture-by-picture size.
0 = Small
1 = Medium
2 = Large
Examples
Set the picture-in-picture size to large:
(PHS 2)
PIF–Projector Information
Displays information about the projector.
This command is only available when the projector is in service mode and is read-only.
Commands
Command
Description
Values
PIF+MDLN?
Returns the model name.
—
PIF+SNUM?
Returns the serial number.
—
PIF+NERS?
Returns the native resolution.
—
PIF+FWVS?
Returns the firmware version.
—
PIF+CFVS?
Returns configuration information.
—
Serial API commands
GS Series 599 Serial Commands Technical Reference
47
020-102403-02 Rev. 1 (04-2017)
Copyright
©
2017 Christie Digital Systems USA Inc. All rights reserved.
