DSV–Digital Vertical Shift
Moves the projector image up or down. If the image is not zoomed out (Digital Zoom), this command
is disabled.
Commands
Command
Description
Values
DSV <value>
Moves the projector to the up or
down. (Write-only)
0 to 100
0 = Moves the display area to the top
50 = Centers the display area vertically (Default)
100 = Moves the display area to the bottom
Examples
Center the display area vertically:
(DSV 50)
DTL–Detail
Applies a predefined sharpness setting to the current input signal.
Commands
Command
Description
Values
DTL <value>
Sets the sharpness setting.
0 = Maximum
1 = High
2 = Normal
3 = Low
4 = Minimum
Examples
Set the sharpness setting to low:
(DTL 1)
DZH–Digital Horizontal Zoom
Changes the size of the horizontal display area.
If the display area has been resized with this setting, use the DSH—Digital Horizontal Shift and DSV—
Digital Vertical Shift commands to readjust the image.
Serial API commands
GS Series 599 Serial Commands Technical Reference
23
020-102403-02 Rev. 1 (04-2017)
Copyright
©
2017 Christie Digital Systems USA Inc. All rights reserved.