Feeder Line Assembly and Suspension
LIBERTY® Feeding System with Electronic Sensor (ES)
34
Midline Control with (ES) Switch Installation
1.Assemble the Mid-Line Control to the Feeder
Tube, as shown in
2.Attach the Switch Box Assembly to the
Feeder Tube with Hose Clamps as shown in
.
3.Install a toggle switch, out of reach of the
birds, to disconnect power to the Mid-Line
Control. This allows the Mid-Line Control to
serve as a standard feeder when not used as a
control feeder.
4.Wire the Mid-Line Control as shown in the
wiring diagram section of this manual.
Figure 64.Electronic Control Installation