LIBERTY® Feeding System with Electronic Sensor (ES)
Installing the Suspension System
15
Assemble the Feed Cone and Center Support
Slide the feed cone down over the top of the support
cone. be sure to align the guides on the support cone.
Pass the cords up the channel on the support cone. be
sure to run the cord under the retainer as shown.
See
Run the end of the cord up through the guides on the top
of the support cone. Tie cords together to hold the cords
in place.
Assemble the Center Support and
Feed Cone to grill.
2.Guide the cone assembly through the grill cap, be
sure the cords pass through the cap. See
3.Align the threads and rotate the grill to the cone
assembly. See
While hold the pan
SHIELD cap use a piece of tube to rotate the feed
cone to position #4 FOR TURKEY AND #2 FOR
BROILERS.
4.Rotate the support cone while holding the pan shield (DO NOT USE THE BOTTOM OF THE GRILL TO
HOLD WHILE ROTATING) FOR TURKEYS SET TO #4 FOR BROILERS SET TO #2
Figure 20. Assembling lift Cords to Feed Cone
Run cord behind guide and
under the hold down.
SHIELD
Figure 21.Assembling Support Cone to grill
TURKEY
BROILER
Shield
Figure 22.Feeder Cone Strut (side view)