Chore-Time Chore-Tronics 3 Control, Installation & Operator'S Instruction Manual, Page: 81 / 142

Control Setup Chore-Tronics® 3 Control
81
MT2398C
Feed Clock
1. Select the Main menu button.
3. Select the Feed button.
4. This screen displays the Feed
Clock settings link for the Feed clock.
5. The icon displayed to the left of the
Feed button indicates if the feed
output is on or off.
6. Selecting the Feed button will open
Feed clock. Only one Feed clock
is available.
7. Name Clock - Is the current dis-
played clock.
8. Events - Is the current number of
event the clock is using to control
the Feeder.
9. Use Curve - selecting On or Off
from the dropdown activates or
deactivates the curve selected. If
the Feed clock curve is set to ON,
then the current Feed clock set-
tings will not be editable. To
temporarily change the current
light clock settings, first set the
curve to OFF, then make the de-
sired changes.
If the Use Curve is set to
OFF,
the Feed output will follow the
settings displayed ever day until the Use Curve is set to ON then the output will follow whatever
curve is selected.
10. On-at:- Enter the start time of the feeding in this column.
11. Off-at:- Enter the off time of the feeding. This column allow the user to enter a time down to the
second for operating feeders that only need to run for (mins. /sec or stimulations).
12. Run-for:- Shows the amount of feeding time per Event.
2. Select the Clocks Button.
5
6
7 8
9
10
11
12