Chore-Time Chore-Tronics 3 Control Installation & Operator'S Instruction Manual Download Page 68 | Manualshive

Page: 68 / 142

Chore-Time Chore-Tronics 3 Control Installation & Operator'S Instruction Manual Download Page 68

Control Setup

Chore-Tronics® 3 Control

68

MT2398C

Management Screens

Mortality Screen

1. Select the Main menu button.

2. Select the Management Button.

3. Select the Mortality button.

4.

Picked Up-

The number of dead and culled animals collect-

ed is entered on the Picked Up line. Select the Agreed button
and the number(s) entered in the picked up line will be added
to the Today and the Accum lines. The %Mort and the Curr
(Current) Housed will be recalculated. The total daily mortality will also appear in the Daily History-
Production screen.

5.

Agreed-

When the Agreed button is

selected, the number(s) entered in the
picked up line will be added to the Today
and the Accum lines, the % Mort and the
Curr (Current) Housed will be recalcu-
lated, and the total daily mortality will
also appear in the Daily History-Produc-
tion screen.

6.

Partial Taken Out-

This is used if

live birds/animals are removed for any
reason other than dead or culled.

7.

Initial Housed number

- must be entered first.

4

5

6

7

«
...
66
67
68
69
70
...
»

Summary of Contents for Chore-Tronics 3 Control















































































































































Reviews:

No comments