11
EQ Frequency Controls
On the front panel are the EQ frequency controls. There are four controls, two for each channel, one for
high frequency and one for low frequency. Using these you can adjust the low and high frequency
response for the left or the right channel. The settings affect all the inputs and outputs but not the AV
bypass or tape output loop.
To activate the EQ frequency controls press the OP1+2 button on the remote control. The display will
show EQ on. You can then adjust the frequency response to suit the room conditions. To switch off the EQ
and bypass the circuit for a standard response press the OP1+2 button again until the display reads EQ
OFF.
Please note due to the headroom required for the frequency EQ adjust the gain will be lower. Please
take care when switching the EQ OFF that you reduce the volume accordingly.
