9
Output Connections
You need to connect the outputs on the back of the Ultima Pre to a power amplifier in order to drive your
loudspeakers. There are three pairs of balanced XLR outputs and three pairs of RCA phono outputs, each
of which will drive a 68 ohm load. Choose either depending on the appropriate input connection on your
power amplifier. Left channel connections are on the left, right channel connections are on the right, each
output is identical.
Note: For optimum performance it is recommended that the balanced outputs are used where possible.
If you wish to bi-amp or tri amp then you can connect up to three sets of amplifiers to the output
connections.
