15
Cycle of input selection options for Bus B
Select the output
Press the SET button to select the output.
Adjusting the volume
Use the volume knob to adjust the volume manually. A clockwise turn of the knob will increase the volume
and an anti-clockwise turn of the knob will decrease the volume. The volume range runs from 0 to 98 and
is displayed on the Ultima Pre display as you change the volume. If the outputs are muted, a volume
change will un-mute the outputs to prevent large changes in volume from damaging your loudspeakers.
The volume level is shown on the display as the word VOL and a two digit level as shown in the example
diagram below.
Volume display
Changing the balance
Use the balance knob to shift the balance between the left and right loudspeaker. A clockwise turn of the
knob will shift the balance to the right speaker and an anti –clockwise turn of the knob will shift the
balance to the left speaker.
Switching the VU meter
Press the front panel button marked VU to switch the VU display on and off.
