13
Everyday use of your Ultima Pre
Turning on your Ultima Pre
Press the power button on the front of the Ultima Pre. Press again to switch off.
Select the input source
Press and hold button A on the front panel to select Bus A. Your Ultima Pre should be set to Bus A for
normal operation and the display will read the last selected input with no dots underneath. The selected
input will automatically be sent to the tape recording T1 phono outputs:
To assign the main output with a particular input signal, press button A and release several times to cycle
through the 7 line inputs until the one you wish to use is displayed. The options are shown in the diagram
below:
