Chord Electronics
ULTIMA PRE 2 |
Manual
_
AV Bypass mode allows the
output of an AV surround sound
processor to be connected and
then routed directly to the output
of the ULTIMA PRE 2. The volume
control and signal processing are
bypassed so that the signal from
the AV processor reaches the
power amplifier exactly as if it
were connected directly.
This has the advantage of
allowing the ULTIMA PRE 2
to remain in an AV system to
give the best possible stereo
two channel playback whilst
still being able to switch to
AV bypass mode to allow
the processor to playback
multichannel film content.
5.1 Basic navigation
5.2 Volume and balance control
5.3 Display
5.4 Recording
5.5 Av bypass
AV Bypass
5.5
30 // 33
Note: The volume control in the
ULTIMA PRE 2 will be bypassed
so please check before switching
on your AV processor that the
volume is turned down. When
switching back please check
that the volume on the Ultima
Pre 2 has not inadvertently been
turned up before playing any
music.
Summary of Contents for ULTIMA PRE 2
Page 33: ......
