Chord Electronics
ULTIMA PRE 2 |
Manual
_
If you want to use the Ultima Pre
2 with headphones, it features
two 1/4 inch headphone sockets
on the front panel. Headphone
mode automatically mutes your
loudspeakers. Headphone mode
also prevents any volume control
from automatically un-muting
your loudspeakers.
1)
Turn off the ULTIMA PRE 2
and any other connected
equipment.
2)
Locate the 1/4 inch
headphone jacks on the
front of the unit and plug
in the jack. Use an adapter if
needed.
4.1 Placement
4.2 Connecting an input to
ULTIMA PRE 2
4.3 Connecting ULTIMA PRE 2 to a
power amplifier
4.4 Connecting ULTIMA PRE 2
to a recording device
4.5 Connecting ULTIMA PRE 2
to a AV device
4.6 Connecting ULTIMA PRE 2
to headphones
Connecting ULTIMA PRE 2
to headphones
4.6
23 // 33
Headphone
inputs
3)
With the Volume set to
the lowest setting Turn on all
equipment, including the
ULTIMA PRE 2.
4)
Allow both the ULTIMA PRE 2
and power amplifier to power
up.
5)
Ensure the output mode is
set to Heapdhones. If it is
not check the cable is
corectly connected.
6)
With the Volume a the lowest
setting initiate playback and
gradually increase the volume
to a comfortable setting
to protect your hearing and
headphones.
Summary of Contents for ULTIMA PRE 2
Page 33: ......
