Chord Electronics
ULTIMA PRE 2 |
Manual
_
Using The XLR and RCA outputs
shown below, it is simple to
connect the ULTIMA PRE 2 to a
power amplifer:
1)
Turn off the ULTIMA PRE 2
and any other connected
equipment.
2)
Locate the XLR or RCA
outputs on the ULTIMA PRE
2 and connect to the XLR or
RCA input on the choosen
power amplifier.
3)
With the Volume set to
the lowest setting Turn on all
equipment, including the
ULTIMA PRE 2.
4.1 Placement
4.2 Connecting an input to
ULTIMA PRE 2
4.3 Connecting ULTIMA PRE 2 to a
power amplifier
4.4 Connecting ULTIMA PRE 2
to a recording device
4.5 Connecting ULTIMA PRE 2
to a AV device
4.6 Connecting ULTIMA PRE 2
to headphones
Connecting ULTIMA PRE 2
to a power amplifier
4.3
20 // 33
4)
Allow both the ULTIMA PRE 2
and power amplifier to power
up.
5)
Ensure the output mode is
set to Output 1. If it is
not check the cable is
corectly connected.
5)
With the Volume a the lowest
setting initiate playback and
gradually increase the volume
to a comfortable setting
to protect your hearing and
speakers.
XLR and
RCA
outputs
WARNING:
Do not
use the recording
output to connect
the ULTIMA PRE 2 to a
power amplifier as it is a line
level output and can not be
attenuated!
Summary of Contents for ULTIMA PRE 2
Page 33: ......
