Chord Electronics
ULTIMA PRE 2 |
Manual
_
In order to connect up ULTIMA
PRE 2 to a source, you must
connect your cables to one of the
inputs listed below. ULTIMA PRE
2 can have up to 8 inputs at once
so it gives you the flexability to
fully curate your system with
minial effort required.
First, you must ensure that
ULTIMA PRE 2, and any
connecting equipment, is turned
off.
For a balanced input use the
double XLR inputs listed below.
For unbalanced inputs use the
other 4 inputs listed below.
4.1 Placement
4.2 Connecting an input to
ULTIMA PRE 2
4.3 Connecting ULTIMA PRE 2 to a
power amplifier
4.4 Connecting ULTIMA PRE 2
to a recording device
4.5 Connecting ULTIMA PRE 2
to a AV device
4.6 Connecting ULTIMA PRE 2
to headphones
Connecting an input to
ULTIMA PRE 2
4.2
19 // 33
Balanced
input 1-4
Unbalanced
line 5-8
Please note that each input is
arranged as a stereo pair, right
and then left. Later, when you
come to switch ULTIMA PRE 2
on, each pair of inputs will be
shown as ‘LINE X’ on the display.
LINE 1 begins the row of XLRs
and LINE 5 begins the row of
RCA.
It should be carefully noted
that the pair of XLR, RCA, A/V
and the right most T1 and T2
connectors next to the IEC
input are outputs. You must not
connect any inputs here.
Summary of Contents for ULTIMA PRE 2
Page 33: ......
