V1.0W11 WRIST PULSE OXIMETER
17
Pic.19
4. Measurement
(1). After parameter setting, you can press the
“
” button for about three seconds to return to the
measuring screen.
Place the user
’s finger inside the sensor shown as the picture 20. Refer to the respective sensor
instructions for specific information about placement and user safety.
The signal searching picture is shown as Pic.21.
Pic.20 Pic.21 Pic.22
(2). The measuring result shown as Pic.22.
Description of picture 22: The SpO
2
value is 89% and the PR value is 68bpm.
Important
：
Any of the following conditions may reduce the performance of the wrist oximter:
-----Flickering or very bright light
；
-----Weak pulse quality
；