V1.0W11 WRIST PULSE OXIMETER
10
Pic. 2
2. Inserting and Replacing the Batteries
(1). Pull the battery cover indicated by the arrow, and lift the end of the cover upwards.
Note:
Do not pull too hard on the cover.
(2). Insert one battery as indicated in Picture 2.
Note:
Make sure
that install the battery with correct battery
polarity.
(3). Remove the old battery and discard or recycle them
according to local applicable regulations.
(4). Carefully re-position the battery cover. Do not force the
cover into place; it fits only when positioned properly.
(5). If the wrist oximeter does not turn on when you press the
power on
button, reinsert the battery.
Note:
The battery indicator will appear when the voltage is too low, please replace the battery in time.
The Wrist Oximeter contains non-volatile memory, so removing or replacing batteries will not affect the
data saved in memory. Stored data will remain in memory until overwritten by newer data or cleared fro m
memory with MedView software.