V1.0W11 WRIST PULSE OXIMETER
13
3.2 ID &Time setting
Please set the ID number and time before the first measurement. Set different ID numbers for
different users.
3.2.1 ID Setting
Press the
“
” button for about three seconds to start up the unit.
Refer to picture 10. Pic.10
The display screen will be highlighted for self-test when powered on. And then the next screen will display
the version of the software.
If there is no probe inserted, after powering on, the following information will appear shown as Pic.11. If the
probe is inserted into the oximeter but no finger, the information will be shown as Pic.12.
Pic.11 Pic.12 Pic.13
Regardless of the information press the
“
” button for about 3 seconds, then you will enter into the
screen(Pic.13):
Then press the
“ ” button and the Id number will change from 1~10. Set the number and then press the
“
” button for a short time, you will save the settings and enter into the time setting screen. If you press the
“
” button for about 3 seconds, you will return to the measuring screen.
Note:
If the ID number is one, the measurement result will be saved automatically.