V1.0I2 PULSE OXIMETER OPERATOR
＇
S MANUAL
9
8. SpO
2
% lower alarm limit indicator.
9. Pulse amplitude bar.
It indicates the dynamic pulse amplitude and rate. As the detected pulse
becomes stronger, more bars light with each pulse. The reverse is true for
weak pulses.
10. SpO
2
waveform display area.
◆
It shows the SpO
2
waveform during normal measurement.
◆
It shows
“Probe Off” in probe-off condition.
◆
It shows
“Finger Out” in finger-out condition.
11. PR lower alarm limit indicator.
12. PR upper alarm limit indicator.
Note:
If you set
“Display” in “Alarm Set” menu “On”, SpO
2
% upper & lower
alarm limit values and PR upper & lower alarm limit values will be shown on
the screen (refer to Fig.2). If you set it off, all the alarm limit indicators will
not be shown (refer to Fig.35).
13.
PR
bpm: it is PR area of display below the indication.
◆
It shows the pulse rate in beats per minute during normal measurement.
The measured PR in Fig.2 is 68 bpm.
◆
The background color of the PR value shows red when the PR is outside
the alarm limits.
◆
It shows three dashes throughout probe off and finger out conditions.
