V1.0I2 PULSE OXIMETER OPERATOR
＇
S MANUAL
23
CHAPTER 7 Maintenance and Repair
WARNING
：
The advanced digital circuit inside the oximeter does not
require periodic calibration and maintenance, instead of replacing the
batteries.
CAUTION: Don
’t open the cover of oximeter or repair electronic circuits.
Openning the cover will cause the damage of the device and the
annulment of the guarantee.
7.1 Maintenance
It is very important for user to make daily maintenance of oximeter and parts
and it is the important guarantee for our company to perform maintenance
service. If user did not do according to the below stipulation and lead to
oximeter failure and possible health damage, our company is entitled to
change guarantee time.
a
）
Should constitute effective maintenance plan for oximeter and reused
supplies. This plan includes inspection and clearance and it must comply with
the policy of epidemical control unit or health department.
b
）
Please take out battery before cleaning the oximter.
c
）
Should make regular clearance. (Must comply with the policy of epidemical
control unit or health department) The appearance of oximeter can be cleared
by not-denuded wet cloth. Please use the following permitted solution:
Ammonia (diluted)
Glutaraldehyde
Javel bleacher (diluted)
Mild soap water (diluted)
Please comply with the following regulations to avoid oximeter damage:
Comply with diluted solution advised by manufacturer all the time
Wipe up all clearance solution by dry cloth after clearance all the time.
Never use such cleanser with wax.
Never use or spurt any clearance solution on oximeter and permit liquid flow
into the back of power supply, connector or any air channel in oximeter.
Never use the following cleanser:
○ Any kind of scrub solution or impregnant
○ Acet
○ Ketone , Lycine
○ Cleanser with alcohol
