S
ECTION
IV:
A
DMINISTRATIVE
S
ETTINGS
Administrative Settings
913-623 @Rev A
Section IV, page 7
F
ILE
M
AINTENANCE
ManageUPS allows for firmware, configuration and graphics files to be uploaded
to the card over the network via TFTP or FTP.
The
File Transfer and Downloads utilities can be used to update adapter firmware
or to simplify configuration of multiple adapters on your network.
<firmware file>
ManageUPS agent and services package.
sys
<munosfile>
ManageUPS OS kernel
conf
snmp.conf
Contains snmp trap and community settings
System1.cfg
Contains communication settings, device driver
information and any user-entered UPS identity
parameters that are held by the ManageUPS agent
as a proxy for information not supplied by a particular
UPS model..
K
EY
F
ILES
cfg
mopups.cfg
Contains settings for network timeserver, email
messaging, SNMP wellKnownAlarms, security,
servers, remote server shutdown and logging.
The "sys" type files contain the agent firmware and operating system files. If you
register your product on the connectivity support web site, you will be notified by
email if an update for either of these files is available for download.
The "cfg" type files store the results of user-specific settings entered during the
configuration steps covered in sections II and III.
To simplify configuration of multiple adapters on your network:
After you have configured the first adapter, download the mopups and/or snmp
configuration file(s) and save to a directory on your workstation hard drive. The
files should be named as in the table above before uploading to the adapter.
If there are some settings that you would like to make globally throughout your
adapter population, these
global settings sections can be saved as a special
subset of the configuration file. Rename the extension of partial "
.cfg
" files to
"
.merge
".
When a "
.merge"
file is uploaded to the adapter, its contents are
merged with the
existing file of the same name. When a ".
cfg"
file is uploaded, it replaces the
existing file completely.
You can use TFTP or FTP to upload these configuration files to other adapters on
your network.
Or, use ManageUPS DCU application (Windows) to simplify file maintenance
activities. (See
Quick Start Guide for more information on DCU and file
maintenance)
Summary of Contents for ManageUPS
