37
RAU/RLY/DVR CARD
This card allows connection to the Remote Alarm Unit option. It also can be used to drive the Industrial Contact Card as seen in
Figure 17 – RAU (Remote Alarm Unit) or Relay Card or Driver Card
. The voltage-free contacts are rated at 30V .5A max.
Figure 17 -
RAU (Remote Alarm Unit) or Relay or Driver Card
The RAU/RLY/DVR PCB terminal layout is as follows:
•
Pin 1 is AC Fail *
•
Pin 2 is Low Batt *
•
Pin 3 is On Bypass *
•
Pin 4 is Inv Fail *
•
Pin 5 is Sum Alarm *
•
Pin 6 is Common (Return)
•
Pin 7 is +16V (RAU)
•
Pin 8 is +24V ISO
•
Pin 9 is +24V Ret
•
Pin 10 is +24V Ret
* Note: These outputs can be changed from N/O to N/C directly on the card.
