2
3
4
5
1
Attach the Driving Wheels │ 7
Rear axle
Rear Bottom View
Driving wheel
2WD
Remove all the parts from the rear axle.
1. Slide the
gear box
onto the rear axle. “R” labeled gear box should be fit to the
“R” side of vehicle body; “L” labeled gear box should be fit to “L” side of vehicle
body. Keep the motor and the connector on the gear box pass through the
larger hole on the rear of the vehicle and out where the battery sits.
2. Slide the
driving wheel
onto the rear axle. And keep the driving wheel match
up with the gear box.
3. Slide the
Ø12 washer
onto the rear axle.
4. Tighten a
lock nut
to the end of the rear axle with a spanner.
HINT: An extra
spanner has been provided to hold the Lock Nut on the other side of the
rear axle while tightening the Lock Nut on the other side.
Repeat
the above procedure to assemble the
other driving wheel.
5. Fit the
hubcaps
to the wheels.
