background image

Use the 2.4G Remote Controller (IF EQUIPPED)   │  18

ADULT OPERATING REQUIRED!

WARNING:

1. Connection button (build connection)

Long press the 

Connection button

 for 2-4 seconds first, then turn on the power 

button located on the vehicle dashboard console, when the low speed indicator 
goes from 

flashes into long bright

, means the connection successful. If the 

low speed indicator only 

flashes

, means the connection failed. Replace the 

batteries and repeat the steps above.

2. Brake button

Press the button to stop the vehicle, press it again to release the brake.

3. Speed select button

The switch operates the vehicle to move in low, normal or high speed.

    HINT: The vehicle is designed to operate in low speed only in reverse.

• Leave the remote controller idling for about 10 seconds, it will shut down 

automatically.

• Repeat step 1 when you replace the batteries of the remote controller.

Connection

button 

Forward button

Left turning

button

Right turning

button

Brake button

Speed select button

High speed indicator
Normal speed indicator
Low speed indicator

INSERT THE BATTERIES

Lift the battery compartment door on the back of the controller and insert 
two AAA(LR03) batteries.

NOTE: Batteries not included.

Refer to the battery information on page 4.

NOTE:

The remote control has precedence over foot pedal operation.
(The foot pedal won’t work while you operate the Remote Controller)

Reverse button

Summary of Contents for BMW X6M



























Reviews: